Chaukor The Second

 

Chaukor The Second was inspired by the original Chaukor (available here – https://swatchophile.wordpress.com/2015/02/24/chaukor/). The two shawls are similar in aesthetic, but this second version is simpler.

The pattern includes written instructions for three sizes – a large stole version, a medium-sized stole version and a small scarf version.

The accompanying pictures show the largest version of the shawl.

Finished Dimensions – 19” width x 72” length (Large) / 14” width x 68” length (Medium) / 11” width x 60” length (Small)

Gauge – 21 sts and 27 rows = 4 inches in lace stitch after blocking

Yarn – Cascade Heritage Sock (I used the Camel colorway) or any fingering weight yarn that blocks well.

You will need approximately 1000 yards for the large size, 720 yards for the medium size and 500 yards for the small size.

Needles – US size 6 or 4mm needles

Notions – Blocking pins and wires

Abbreviations:

  • k – knit
  • p – purl
  • CO – Cast On
  • YO – yarn over
  • k2tog – knit 2 together
  • ssk – slip, slip, knit the two slipped stitches together
  • RS – Right side
  • WS – Wrong side
  • sts – stitches

Lace Grid Stitch Pattern

(The square brackets contain repeatable sets of stitches)

  • Rows 1, 3 and 5 (RS) – K6, k2tog, yo, k1, yo, ssk; [k2, k2tog, yo, k1, yo, ssk] to the last 6 sts; k6
  • Rows 2, 4 and 6 (WS) – k3, p3, k5; [p2, k5] to the last 6 sts; p3, k3
  • Rows 7 and 11 (RS) – knit all sts
  • Rows 8 and 10 (WS)– k3, p to last 3 sts, k3
  • Row 9 (RS) – k3; [k2tog, yo] to last 4 sts; k4
  • Row 12 (WS) – knit all sts

Instructions for knitting:

CO 101 (Large) / 73 (Medium) / 59 (Small) sts loosely, using the long-tail method.

Knit 4 rows

Now start working in the Lace Grid stitch pattern. Knit rows 1 to 12 of the pattern 39 / 37 / 32 times. Then knit rows 1 to 5 one more time, ending with a right side row (row 5 is a RS row).

Knit 4 rows

Loosely bind off all stitches knitwise (you will be binding off on a WS row).

Wet block the shawl to desired measurements. Weave in ends.

 

 

 

Kanak

Download PDF version of the pattern (last edited on July 02, 2016)

Go to the pattern page on Ravelry

Kanak is a crescent-shaped shawl featuring a textured lace stitch pattern. I used approximately 550 yards of KnitPicks Capretta and US size 5 needles to knit my sample, but any fingering-weight yarn with good stitch definition should work. The size of the shawl can be adjusted by working more or fewer repeats of the pattern. To get a drapier fabric, you could go up a needle size or two. Conversely, to get more well-defined, denser texture, you could go down a needle size, which will also increase the yarn requirement.

The pattern is a simple 12-row repeat with mostly knits and purls, and a few eyelets that appear only once every 6 rows.

Yarn:

600 yards of Knitpicks Capretta or any fingering weight yarn with good stitch definition

Needles:

US size 5 or 3.75mm needles (32″ circular needles or longer to accommodate the 500-plus stitches that you’ll finally end up with)

Notions:

Blocking pins

Finished dimensions:

Wingspan – 70”
Depth at Centre – 13”

Gauge:

19 sts and 36 rows = 4 inches measured over textured pattern after blocking

Other than the yarn and needles you use, the way you block the shawl will also affect the gauge and finished dimensions of the shawl significantly.

Abbreviations:

  • k – knit
  • p – purl
  • pfb – purl into the front and back of the stitch (1 stitch increased)
  • kfb – knit into the front and back of the stitch (1 stitch increased)
  • YO – yarn over
  • k2tog – knit 2 together
  • ssk – slip, slip, knit
  • RS – Right side
  • WS – Wrong side
  • sts – stitches

Kanak Textured Lace Pattern

  • Row 1 (RS): (k1, yo) 2 times, kfb, k to last 3 sts, kfb, (yo, k1) 2 times
  • Row 2 (WS): k3, p to last 3 sts, k3
  • Row 3: (k1, yo) 2 times, kfb, p1, k1, (p2, k1) to last 4 sts, p1, kfb, (yo, k1) 2 times
  • Row 4: k4, p1, (k2, p1) to last 4 sts, k4
  • Row 5: (k1, yo) 2 times, kfb, p1, yo, ssk, k2tog, yo, (p2, yo, ssk, k2tog, yo) to last 4 sts, p1, kfb, (yo, k1) 2 times
  • Row 6: Knit all sts
  • Row 7: Same as row 1
  • Row 8: Same as row 2
  • Row 9: Same as Row 3
  • Row 10: Same as row 4
  • Row 11: (k1, yo) 2 times, kfb, (k2tog, yo, p2, yo, ssk) to last 3 sts, kfb, (yo, k1) 2 times
  • Row 12: knit all sts

 

Instructions to knit the shawl:

CO 12 sts using the long tail method

Knit 2 rows

On the next row, start working in the Kanak pattern stitch.

Starting with a right side row, knit rows 1-12 of the pattern 9 times or until the shawl is the desired length and depth.

(You’ll be increasing 6 stitches on every RS row, and because it’s a 12-row repeat (6 RS rows), you’ll be adding 6 x 6 = 36 stitches to the shawl with every completed repeat. To see a complete stitch count chart, go to the end of the pattern)

After working in the stitch pattern 9 times, you should have 336 stitches on the needles.

(You could work more repeats if you want a larger shawl).

Border:

Starting with a RS row, knit as follows:

Work the first two rows of the Kanak pattern as written.

(342 sts)

On the next row:

Row 3 of the border (RS): K3, pfb, k1, [(pfb two times), k1] to last 4 sts, pfb, k3

(After this increase row, you should have 566 sts on the needle).

Row 4: k5, p1, (k4, p1) to the last 5 sts, k5

Row 5: k3, p2, k1, (p4, k1) to last 5 sts, p2, k3

Row 6: Same as row 4

Row 7: Knit all sts

Row 8: k3, p to last 3 sts, k3

Row 9: knit all sts

On the next row (WS), loosely cast off all stitches knitwise.

 

Block the shawl to desired measurements. Because the textured stitch makes a stretchy fabric, the final size of the shawl will depend on how aggressively you block it. If you’d like to retain the stretchiness and texture of the shawl, do not block too aggressively. If you do block it hard, you’ll get a less textured but much drapier fabric, which is also nice!

You’ll be increasing 6 stitches on every RS row, and because it’s a 12-row repeat (6 RS rows), you’ll be adding 6 x 6 = 36 stitches to the shawl with every completed repeat.

 

Stitches cast on 12
Stitches after 1st repeat 12 + 36 = 48
Stitches after 2nd repeat 48 + 36 = 84
Stitches after 3rd repeat 84 + 36 = 120
Stitches after 4th repeat 120 + 36 = 156
Stitches after 5th repeat 156 + 36 = 192
Stitches after 6th repeat 192 + 36 = 228
Stitches after 7th repeat 128 + 36 = 264
Stitches after 8th repeat 164 + 36 = 300
Stitches after 9th repeat 200 + 36 = 336
Stitches after 2nd row of the border 336 + 6 = 342
Stitches after 3rd row of the border 342 + 224 = 566

 

Chaukor

DSC_0111 (800x532)

DSC_0076 (712x800)   DSC_0068 (668x800)

Chaukor (pronounced chalk-ore) is a rectangular shawl featuring a grid-like, textured lace pattern. The stitch pattern (worked over a multiple of 15 stitches and 18 rows) was inspired by the beautiful tie-and-dye fabrics of Rajasthan, India, and also the state’s breathtaking architecture – haveli windows in particular.

The pattern includes both written instructions and a chart.

To knit the shawl, you cast on a total of 81 stitches, including 6 border stitches (3 on either edge) that are knit on every row and 75 stitches (15 x 5) between the borders that are worked in the Chaukor stitch pattern.

Yarn – Two skeins of Cascade Heritage Solids or approximately 850 yards of any fingering weight yarn that blocks well and has  good stitch definition. I used a little less than 2 skeins of the Cascade Heritage Solids in the “Moss” color (5612).

Needles:

  • US size 6 (4 mm) for knitting
  • US size 7 (4.5 mm) for casting on loosely (optional).

Notions:

  • Tapestry needle to weave in ends
  • 6 stitch markers (if using)
  • Blocking pins (and wires, if using)

Gauge in pattern stitch (after blocking) :

  • 4 inches = 24 stitches and 28 rows

Finished Dimensions:

  • Length – 71 inches, Width – 13 inches

Abbreviations:

  • k – knit
  • p – purl
  • YO – yarn over
  • k2tog – knit 2 together
  • ssk – slip, slip, knit
  • s2-k1-psso – slip 2 stitches as if to knit together, knit 1, passed slipped stitches over the knit stitch (2 stitches decreased)
  • PM – place marker
  • SM – slip marker
  • RS – Right side
  • WS – Wrong side

Chaukor Stitch Pattern (Worked over a multiple of 15 stitches and 18 rows)

  • Row 1 (RS) – *k1, YO, ssk, k9, k2tog, YO, k1*; repeat from * to *
  • Row 2 (WS) – purl all stitches
  • Row 3 – *k2, (YO, s2-k1-psso, YO, k1) three times, k1*; repeat from * to *
  • Row 4 – *p1, k13, p1*; repeat from * to *
  • Row 5 – same as row 3
  • Row 6 – same as Row 4
  • Row 7 – *k2, YO, s2-k1-psso, YO, k5, YO, s2-k1-psso, YO, k2*; repeat from * to *
  • Row 8 – *p1, k5, p3, k5, p1*; repeat from * to *
  • Row 9 – same as row 7
  • Row 10 – same as row 4
  • Row 11 – same as row 3
  • Row 12 – same as row 4
  • Row 13 – same as row 3
  • Row 14 – purl all stitches
  • Row 15 – *k2tog, YO, k11, YO, ssk*; repeat from * to *
  • Rows 16, 17 and 18 – Knit all stitches

ChaukorChart

Instructions to knit the scarf:

Loosely cast on 81 stitches (75 pattern stitches and 6 border stitches – 3 on either side) using the long-tail cast on and the larger needle (or your preferred cast-on method).

Switch to smaller needles.

  • Knit 6 rows
  • Row 7 – knit 3 stitches, place marker (PM); work Row 1 of the Chaukor stitch pattern five times, placing stitch markers after every repeat; knit the last 3 stitches. 6 markers placed.

From this point on, the first and last 3 stitches will always be knit to form a garter stitch border, and the Chaukor stitch pattern will be worked over the center 75 stitches (15 x 5).

  • Row 8 – On the next row, knit 3 stitches, slip marker; work Row 2 of the stitch pattern five times, slipping markers as you go; knit the last 3 stitches.
  • Continue to work rows 3-18 of the Chaukor stitch pattern between the garter stitch borders, as established above.
  • Repeat these 18 pattern rows 26 more times (or fewer or more, depending on how long you want the shawl)

To end:

  • Knit 3 rows (the last row you knit will be a right side row).
  • Loosely cast off all stitches knit-wise on the wrong side.

Block to desired measurements. Weave in ends.

Imaarat

IMG_9272 (1024x569)
IMG_9167 (1024x768) IMG_9263 (1024x771)

Download PDF version of pattern

Link to Ravelry page

Imaarat is a simple geometrical lace scarf with side-to-side construction.  The lace is worked on odd number rows only, and all even number rows are knitted.

The scarf is knit in one piece – the first half  (from the cast on edge to the center) is worked using K2TOGs  and yarn-overs (Imaarat Stitch Pattern A) and leans naturally towards the left. The second half (from the center to the bind-off edge) is worked using SSKs and yarn overs (Imaarat Stitch Pattern B), and leans towards the right. This natural slant towards the left and then the right creates the shallow V shape seen in the pictures.

Both the front and back of the scarf look good, but I prefer the side on which you’re knitting all stitches (which would otherwise be the back of your work).

Yarn – One skein of Cascade Heritage Solids (or Paints) or 430-460 yards of any fingering weight yarn that blocks well. I used one skein of the Cascade Heritage Paints in the “Isle of Skye” colorway.

[A number of knitters who’ve knit this scarf since the design was first released feel that the stitch pattern would show better in a solid-color yarn, which means that the Cascade Heritage Solids, or any solid colored fingering weight yarn might be a better choice than a variegated one]

Happy knitting! 🙂

Needles:

  • US size 6 (4 mm) for knitting
  • US size 8 (5 mm) for casting on loosely (optional).

Notions:

  • Tapestry needle to weave in ends
  • 6 stitch markers (if using)
  • Blocking pins (and wires, if using)

Gauge (after blocking) :

  • 4 inches = 23.2 stitches and 25 rows

Finished Dimensions:

  • Length – 55 inches, Width – 10.5 inches

Abbreviations:

  • yo – yarn over
  • k2tog – knit 2 together
  • ssk – slip, slip, knit
  • PM – place marker
  • SM – slip marker

Imaarat Stitch Pattern A (for first half) – worked over a multiple of 11 stitches and 16 rows

  • Row 1 – *(k2tog, yo) twice, knit 7 stitches*, repeat from * to *
  • Row 2 and all even number rows – knit all stitches
  • Row 3 – same as row 1
  • Row 5 – same as row 1
  • Row 7 – *(k2tog, yo) 5 times, knit 1*, repeat from * to *
  • Row 9 – same as row 7
  • Row 11 – *knit 6 stitches, (k2tog, yo) twice, knit 1*, repeat from * to *
  • Row 13 – same as row 11
  • Row 15 – same as row 11
  • Row 16 – knit all stitches

Imaarat Stitch Pattern B (for second half) – worked over a multiple of 11 stitches and 16 rows

  • Row 1 – *knit 7 stitches, (YO, ssk) twice*, repeat from * to *
  • Row 2 and all even number rows – knit all stitches
  • Row 3 – same as Row 1
  • Row 5 – same as Row 1
  • Row 7 – *knit 1, (YO, ssk) 5 times*, repeat from * to *
  • Row 9 – same as Row 7
  • Row 11 – *knit 1, (YO, ssk) twice, knit 6 stitches*, repeat from * to *
  • Row 13 – same as row 11
  • Row 15 same as row 11
  • Row 16 – knit all stitches

ImaaratCharts

Instructions to knit the scarf:

First half of the scarf (uses Stitch Pattern A / Chart A):

Loosely cast on 61 stitches (55 pattern stitches and 6 border stitches – 3 on either side) using the larger needle.

Switch to smaller needles.

  • Knit 6 rows
  • Row 7 – knit 3 stitches, place marker (PM); work row 7 of Chart / Stitch Pattern A five times, placing markers after every repeat; knit the last 3 stitches. 6 markers placed.
    (Note that you begin working the lace stitches with row 7 of Imaarat Stitch Pattern A or Imaarat Chart A)
  • On the next row (and all even number rows) knit all stitches, slipping markers as you go.
  • On the next row, knit 3 stitches, SM; work row 9 of Pattern A five times, slipping markers as you go; knit the last 3 stitches.
  • Next row – knit all stitches.
  • Continue to work rows 11 to 16 of Pattern A as above, between the garter stitch borders.
  • Now work rows 1 to 16 of Pattern A ten times (working 5 repeats between borders on every row, as established), ending with row 16 of the pattern.

Center:

  • Knit 2 rows (knit all stitches). These two rows mark the center of the scarf.

Second half of the scarf (uses Stitch Pattern B / Chart B):

  • On the next row, knit 3 stitches; work row 1 of Stitch Pattern / Chart B five times (separated by markers); knit the last 3 stitches
  • On the next row, knit all stitches
  • Continue to knit rows 3 to 16 of Pattern B as above, while maintaining a garter stitch border
  • Repeat rows 1-16 of Pattern B nine more times.
  • To finish, knit rows 1 to 10 of Pattern B once more (ending with row 10).

Knit 5 more rows.

Bind off all stitches purlwise.

Block to desired measurements, using the natural slant of the fabric as your guide to shape the scarf. Weave in ends.

Bahaar

Download PDF version of the pattern

Link to Ravelry page

‘Bahaar’ is a light stole featuring a lace stitch pattern worked over a multiple of 13 stitches and 18 rows.

I used a little more than 2 skeins, or approximately 600 yards of the Cascade 220 Fingering, to knit a 12.5-inch wide and 68-inch long stole (longer than average). A slightly shorter version can be knit using 2 skeins or less.

To make a wider shawl, just cast on more stitches and work 7 or 8 horizontal repeats of the pattern between the garter stitch borders.

IMG_8700 (1024x768) IMG_8714 (1024x866) (2)
IMG_8730 IMG_8765

Yarn – I used approx. 2.20 skeins or 600 yards of the Cascade 220 Fingering in the ‘Buff’ colorway.

Needles – A pair of US size 6 (4 mm) needles for knitting; US size 8 (5 mm) needle for casting on loosely (optional)

Notions:

  • 4-5 Stitch markers (if using)
  • Blocking pins / wires
  • Tapestry needle to weave in ends

Gauge (after blocking) – 23 stitches and 28 rows = 4 inches, measured over the Bahaar lace pattern

Finished dimensions – 12.5 inches wide and 68 inches long

Abbreviations:

  • RS – Right side
  • WS – Wrong side
  • YO – yarn over
  • k2tog – Knit 2 together
  • ssk – slip, slip, knit the 2 slipped stitches together
  • (s2, k1, psso) – slip two stitches together as if to knit; knit 1 stitch; pass slipped stitches over the knit stitch (2 stitches decreased)

Bahaar stitch pattern:

  •  Row 1 – *k2, [k2tog, YO] twice, k1, [YO, ssk] twice, k2*; repeat from * to *
  •  Row 2 and all even number / WS rows – purl all stitches
  •  Row 3 – *k1, [k2tog, YO] twice, k3, [YO, ssk] twice, k1*; repeat from * to *
  •  Row 5 – *[k2tog, YO] three times, k1, [YO, ssk] three times*; repeat from * to *
  •  Row 7 – *[k2tog, YO] twice, k5, [YO, ssk] twice*; repeat from * to *
  •  Row 9 – *k2, [YO, ssk] twice, k1, [k2tog, YO] twice, k2*; repeat from * to *
  •  Row 11 – *k3, YO, ssk, YO, (s2, k1, psso), YO, k2tog, YO, k3*; repeat from * to *
  •  Row 13 – *k2, [k2tog, YO] twice, k1, [YO, ssk] twice, k2*; repeat from * to * (same as row 1)
  •  Row 15 – *k1, [k2tog, YO] twice, k3, [YO, ssk] twice, k1*; repeat from * to * (same as row 3)
  •  Row 17 – *k3, YO, ssk, YO, (s2, k1, psso), YO, k2tog, YO, k3*; repeat from * to * (same as row 11)
  •  Row 18 – Purl all stitches

Repeat rows 1 to 18 for pattern.

Bahaar Lace Chart

BahaarChart-21Apr2014

Pattern Instructions:

  • Loosely cast on 73 stitches using the larger needle. I used the long-tail method to cast on.
  • Switch to smaller needles. Knit 7 rows.
  • On row 8 (WS), knit 4 stitches, purl 65 stitches, knit the last 4 stitches.

From this point on, the first and last 4 stitches will always be knit to form a garter stitch border, and the Bahaar stitch pattern will be worked over the center 65 stitches (13 x 5).

Stole body:

  • On row 9 (RS), knit 4 stitches; work row 1 of the Bahaar chart /stitch pattern 5 times (placing stitch markers between every repeat if you want); knit the last 4 stitches.
  • On the next row (WS), knit 4 stitches; purl 65; knit the last 4 stitches (all WS rows are worked this way).

Continue, as above, to knit rows 3 to 18 of the Bahaar pattern, maintaining a garter stitch border throughout.

  • Repeat rows 1 to 18 of the Bahaar stitch pattern a total of twenty-five times, or till the scarf is approx. 2 inches shorter than the length you want.
  • Then knit rows 1 – 12 of the pattern once more (ending with a WS row).

To end:

  • Knit 7 rows
  • Loosely bind off all stitches knitwise (on the WS).

Block to desired measurements. Weave in ends.

Lataa

Download PDF version of the pattern (original English version)
Download Swedish version (many thanks to Stickaboo for the translation!)

Link to Ravelry page

IMG_8496 IMG_8494 (1280x960)  IMG_8504 (1280x960) IMG_8469 (1280x960) 

This simple lace scarf is knit using a little less than 100 grams, or approximately 400 yards of fingering weight yarn. I’m calling it “Lataa”, which means a ‘vine’ or ‘creeper’ in Hindi, because that’s what it reminds me of! The stitch pattern is worked over a multiple of 13 stitches and 10 rows. You cast on a total of 45 stitches, including 6 border stitches (3 on either side) that are knit on every row, and 39 stitches (13 x 3) in the center that are worked in the lace stitch pattern.

The pattern includes both a chart (on page 3) and written instructions.
This pattern has not been tech edited or tested. If you have any questions, please feel free to send me a personal message on Ravelry, or leave a comment on my blog.

___________________________________________

Yarn – 100 grams or approx. 400 yards of any fingering weight yarn that blocks well (preferably with wool as the primary fiber). I used a little less than one skein of Cascade Heritage (Solids).

Needles – A pair of US size 6 (4 mm) needles for knitting; US size 8 (5 mm) needle for casting on loosely (optional)

Notions:
• 2-3 Stitch markers (if using)
• Blocking pins / wires
• Tapestry needle to weave in ends

Gauge – 19.5 stitches and 28 rows / 4 inches measured over pattern stitch

Finished dimensions – 8.5 inches wide and 60 inches long

Abbreviations:
• RS – Right side
• WS – Wrong side
• YO – yarn over
• k2tog – Knit 2 together
• ssk – slip, slip, knit the 2 slipped stitches together
(s2, k1, psso) – slip two stitches together as if to knit; knit 1 stitch; pass slipped stitches over the knit stitch (2 stitches decreased)

LataaChart

Lataa Stitch Pattern (worked over a multiple of 13 stitches):

• Row 1 (RS) – *[k1, YO, ssk, k1, k2tog, YO] twice, k1*, repeat from * to *
• Row 2 (WS) and all WS rows – Purl all stitches
• Row 3 – *k1, [k2tog, YO] twice, k3, [YO, ssk] twice, k1*, repeat from * to *
• Row 5 – *[k2tog, YO] twice, k5, [YO, ssk] twice*, repeat from * to *
• Row 7 – *k2, [YO, ssk] twice, k1, [k2tog, YO] twice, k2*, repeat from * to *
• Row 9 – *k2, YO, ssk, k1, YO, (s2, k1, psso), YO, k1, k2tog, YO, k2*, repeat from * to *
• Row 10 – Purl all stitches

Repeat rows 1 to 10 for pattern.

Pattern Instructions:
(See chart on page 3 of the pattern)

• Cast on 45 stitches loosely using the larger needle.
• Switch to the smaller needles and knit 7 rows
• On row 8 (WS), knit 3 stitches, purl 39 stitches, knit the last 3 stitches.

Scarf body:

Next row (RS) – Knit 3 stitches; work row 1 of the Lataa chart / stitch pattern 3 times; knit the last 3 stitches
(You can separate out the three repeats of the stitch pattern using stitch markers, if you want.)
From this point on, you always knit the first 3 stitches, then knit in pattern over the next 39 stitches (13 x 3), and knit the last 3 stitches.
While maintaining the garter stitch border, continue to work rows 2 to 10 of the Lataa chart / stitch pattern (working three repeats on every row) as above. Repeat rows 1-10 of the stitch-pattern 41 more times or till you reach the desired length, ending with row 10 of the stitch pattern / chart (on the wrong side).

To finish:

• Knit 7 rows. Bind off all stitches loosely, knitwise.
• Weave in ends. Block to desired measurements.